Series EWS 1.5” Simplex Commercial Water Softener

Commercial/Industrial Water Softeners from Excalibur Water Systems

Document Centre

Product Tabs

Benefits

Series EWS 1.5” Simplex Commercial Water Softener - Commercial/Industrial Water Softeners from Excalibur Water Systems. View specifications here in PDF format.

Features

1 ½” NPT inlet and outlet top mounted lead free brass epoxy coated control valve

Electronic flow meter with accuracy within plus or minus 5 percent, flow rate range 0.5 to 60 gpm. Gallons range 500 to 250,000, totalizer 1 to 9,999,000 gallons

Service flow rate up to 60 gpm, peak flow rate up to 68 gpm, backwash flow rates up to 50 gpm

Fully adjustable 6 cycle controls backwash, slow/fast rinse, draw, refill and service

Soft water on demand

Cycles of operation. Cycle One backwash 1-20 minutes or off, Cycle Two draw/slow rinse 1-99 minutes or off, Cycle Three second backwash 1-20 minutes or off Cycle Four fast rinse 1-20 minutes or off, Cycle Five regeneration refill (in service with treated water) 0.1-99 minutes of off, Cycle Six service

Four methods to initiate regeneration, meter immediate, meter delayed, time clock delayed or pressure differential

1 ½” water distribution system utilizing single point distributor or hub and laterals for maximum flowrates

Operating pressure 20-125 psi / 138-861 kpa, operating temperature 40°F - 110°F (5°C - 44°C)

Solid state microprocessor c/w removal front panel, digital display for time of day, days until next regeneration, volume remaining, current flow rate and total volume used (totalizer)

Double backwash for optimum regeneration cleaning ability and salt efficiency

12 volt output AC transformer

1 – 28 day override on control valve programming

Brine tank salt grid for easy cleaning

Brine tanks 24” x 50” or 30”x 50” c./w brine well and safety float to eliminate overflowing tanks. The brine tank has 800 or 1000lb water softening salt capacity

1 ¼” FPT drain line, ¾” FPT brine line

Search form

Product Tabs