2.0" H Quadplex Progressive EWS SQ2H300 Commercial - Industrial Water Softener

Model: EWS SQ2H300 Commercial/Industrial Water Softener

Document Centre

Download Brochure

Download Data Sheet

Download Specifications

Warranty Information

Product Tabs

Benefits

Series EWS 2.0” H Quadplex Progressive Commercial Water Softener - Commercial/Industrial Water Softeners from Excalibur Water Systems.

Features

Flow Rates up to 500 USGPM

System designs up to 4 vessels

Internal Electronic Flow Meter

Fully adjustable 9 cycle valve

Progressive flow on demand soft water

Four methods to initiate regeneration metered immediate, metered delayed, time clock delayed, or pressure differiential

Triplex & Quad softeners utilize NHWB valves to initiate regenerations and progressive flow system operations

Control Valve

	EWS 2H

Service @ 15 psi drop	125 gpm (includes meter)
Backwash @25 psi drop	125 gpm

TANK APPLICATIONS:
Softener	18” - 63” diameter
Filter	18” - 48” diameter

Inlet/Outlet	2” Female NPT / 3” Female NPT
Fitting Connections	2.5” Groove Lock

Valve Material	Lead Free Brass
Cycles	Up to 9
Regeneration	Downflow

Operating Pressures	20 -125 psi
Operating Temperatures	40 - 110 F

METER:
Flow Rate Range	1.5 - 125 gpm
Volume Range (gallons)	10 - 999,000 gallons
Totalizer	Yes

Distributor Pilot	2.375” O.D. Pipe
	2” NPS

Drain Line Connection	2” Female NPT /
	2.5” Groove Lock

Brine Line Connection	1” Male NPT elbow
	3⁄4” x 1” Solvent elbow

Mounting Base Options	Quick Disconnect
	4” - 8 UN
	6” Flange
	Side Mount

Height From Top of Tank	with 4” - 8 UN QC Base is 11.5”
	with 6” Flange QC Base is 11.6”

Shipping Weight	50 lbs.

ELECTRICAL:
Supply Voltage	120V
Supply Frequency	60 Hz
Output Voltage	20V AC
Output Current	750 mA

Typical Components

MOTORIZED ALTERNATING VALVE FEATURES (MAV)
	Engineered for duplex alternating system 1-1/4” to 2” Motorized Alternating Valves Full porting with minimal pressure loss Provides for no raw water bypass during regeneration Low voltage drive assy controlled by valve circuit board Operating pressures 20psi-125psi Operating temperatures 40˚ F - 110˚ F Patent seal spacer stack assy Hydraulically balanced piston valve Proven and reliable Excalibur DC drive assy
NO HARD WATER BYPASS (NHWB)
	Engineered for duplex alternating with progressive flow & system controller applications 1” to 3” No Hard Water Bypass Valves 316 stainless & composite materials of construction Designed for use in multiple tank configurations Proven and reliable Excalibur DC drive assy Hydraulically balanced piston valve Patent seal spacer stack assy Operating pressures 20psi-125psi Operating temperatures 40˚ F - 110˚ F Low voltage drive assy controlled by valve circuit board Full porting with minimal pressure loss
EXCALIBUR CONTROL SYSTEM
	Excalibur System Controller may operate 2-6 vessels 1” to 2” Control Valve Engineered Systems System diagnostic & programming information download Two fused single pole double throw (SPDT) relay outputs Front panel displays for time of day, day of week, days until next regeneration, current system flow rate & total system volume utilized System regeneration types progressive flow, alternator, series, and random options Solid state processor friendly front panel programming Front panel LED status indicators for online, standby, and regeneration Single demand based output meter Coin cell lithium battery for backup time of day
MINERAL TANKS
	Excalibur mineral tanks are made of high pressure composite materials - LLDPE liner with FRP filament winding outer shell Flanged tanks manufactured with continuous seamless inner liner shell with a solid anodize aluminum cast flange This design provides excellent strength, durability and leak free service Maximum operating pressure 150psi Maximum operating temperature 120˚ F Mineral tanks are PED certified
ASSEMBLED BRINE TANKS
	Excalibur brine tanks are rotationally molded of a high density polythylene for exceptional stress-crack resistant properties increased durability Injection molded plastic HDPE grids available for dry salt storage applications Brine float to eliminate brine tank overflowing Safety float brine valve delivers water demand for high flow brining application and refill Float eliminates pre-checking during brine refill when air is in the brine line could cause excessive flow rates Brine float is enclosed inside a brine well with cap and secured with a two piece overflow set Air check valve to initiate slow rinse cycle after brining complete
RESIN
	Excalibur C-800 water softening resin has a minimum 8% cross link gel type sodium form high capacity polystyrene ion exchange resin Performance maximum capacity of 30,000 grains per cubic foot when regenerated with 15lbs of salt Resin is solid containing no plates shells agglomerates or other shapes for high efficiency maximum capacity performance Excalibur premium water softening resins are manufactured in Canada
GRAVEL SUPPORT BED
	Excalibur uncrushed gravel has a highly spherical shape that promotes good flow and even distribution support bed Gravel will maintain the quality of the softened water Multi depth layered gravel support bed for maximum flow rates with minimum pressure drop
WATER DISTRIBUTION
	Excalibur high impact FDA approved hub and lateral high flow distributors are utilized to evenly collect and distribute the flow of water over the entire resin bed.
PROGRESSIVE FLOW
	Progressive flow provides minimum to maximum peak flow rates utilizing one or all of the vessels in the design configuration to satisfy current demand. This system will utilize and operate outlet isolation valves with a predetermined flow rate set point to bring online additional units to meet peak flow rate requirements. This system configuration determines the need to regenerate based

Search form

Product Tabs