Water Softener, Water Filter and Water Treatment for Commercial Use

You are here!

Series EWS 3” Quadplex Commercial Water Softener

Commercial/Industrial Water Softeners from Excalibur Water Systems
Please call 1 877 733 8999 for warranty information.
Benefits
Features

Series EWS 3” Quadplex Commercial Water Softener - Commercial/Industrial Water Softeners from Excalibur Water Systems. View specifications here in PDF format.

  • 3”NPT inlet and outlet lead free brass control valve, c/w Nema 3R enclosure is water resistant
  • Electronic flow meters for each control valve, accuracy plus or minus 5 percent, flow rate 7 to 300 GPM
  • Service flow rates to 250 GPM continuous (15 PSI Pressure Drop), peak flow rates to 325 GPM (25 PSI Pressure Drop)
  • Fully adjustable 5 cycle control valve that controls up flow backwash, down flow brining, slow rinse, rapid rinse, and down flow service
  • Progressive flow, parallel flow, alternating on demand soft water
  • Five methods to initiate regeneration: meter immediate, meter delayed, time clock delayed, pressure differential, or remote start
  • 3” water distribution system utilizing hub and laterals for maximum flow rates
  • Operating pressure 20 - 125 PSI / 138 - 861 KPA
  • Operating temperature 40°F - 110°F (5°C - 44°C)
  • System designs up to 4 vessels
  • Electronic controller can network up to 4 vessels, field configurable for any flow meter, remote start, remote lockout, variable reserve, flow rate, peak flow rate, totalizer, hours between last two regenerations, hours since last regeneration, adjustable volume remaining, value position programming levels
  • Time of day adjustment
  • Quick programming - adjust hardness, regeneration, time and day override
  • Master programming: configure value type, regeneration type, remote start/lock, US or European time/Volume display, system capacity safety factor, hardness, cycle stop times, flow meter size, auxiliary delay operation
  • 24 volt output AC transformer,7,12 day clock or meter initiated.
  • Brine tank 30”x 50”and 50”x 60”c/w brine well and safety float. The brine tank has a salt capacity of 1,000 lbs or 4500 lbs
  • Gravel under bedding for improved filtration during regeneration