| |
SFC Series Commercial Reverse Osmosis System
1,700 to 10,200 gallons per day
|
|
|
|
| |
| FEATURES: |
- Flow rates designed on temperatures of 25°C or 77°F
- Stainless steel free standing Reverse Osmosis frame
- Stainless steel high pressure booster pump
- 1” NPT Big Blue high pressure prefilter housing with
500 psi burst pressure, pressure release, 125 psi
maximum operating pressure, 20” long.
- 4 ½ “ x 20 “ 5 micron polypropylene replacement cartridge filter
- 1” Burkert solenoid valve
- 0 – 150 psi 4” stainless steel oil filled pressure gauge
for post filter pressure
- 0 – 300 psi 4” stainless steel oil filled pressure gauge
for Reverse Osmosis thin film composite membranes.
- Flow controls: Product, Waste and Recycle
- Waste water recycle reduces waste water cost by
up to 80 percent.
- Stainless steel 4” x 40” Reverse Osmosis membrane housings
c/w Noryl end cap.
- 4” x 40” low energy thin film composite
Reverse Osmosis membranes.
- John Guest high pressure tubing and fittings
- Microprocessor Controller provides standard functions of the controller are monitoring or control of:
- Reverse Osmosis high pressure pump motor
- Inlet solenoid valve
- Automatic flush solenoid valve
- Low feed pressure switch
- High pressure pump switch
- Reverse Osmosis storage tank level switches
- Product water TDS/Conductivity Meter
- Water Temperature
- Pretreatment lockout
- Operating hours
- Reverse Osmosis tank full override
- 120/240 vac 15 + 10% 50/60 Hz 25 watts
- Operating temperature 40°F to 120°F
- Enclosure 8” x 6” x 4” (203mm x 152mm x 102mm)
Nema 4x
|
|
|
| |
|
|
| |
| |
|
| |
|
