- 3” NPT inlet and outlet lead free brass control valve, c/w Nema 3R enclosure is water resistant
- Electronic flow meters for each control valve, accuracy plus or minus 5 percent, flow rate 7 to 300 GPM
- Service flow rates to 250 GPM continuous (15 PSI Pressure Drop), peak flow rates to 325 GPM (25 PSI Pressure Drop)
- Fully adjustable 5 cycle control valve that controls upflow backwash, downflow brining, slow rinse, rapid rinse, and down flow service
- Progressive flow, parallel flow, alternating on demand treated water.
- Five methods to initiate regeneration: meter immediate, meter delayed, time clock delayed, pressure differential, or remote start
- 3” water distribution system utilizing hub and laterals for maximum flow rates
- Operating pressure 20 - 125 PSI / 138 - 861 KPA
- Operating temperature 40˚F - 110˚F (5˚C - 44˚C)
- System designs up to 4 vessels
- Electronic controller can network up to 4 vessels, field configurable for any flow meter, remote start, remote lockout, variable reserve, flow rate, peak flow rate, totalizer, hours between last two regenerations, hours since last regeneration, adjustable volume remaining, value position programming levels
- Time of day adjustment
- Quick programming - adjust hardness, regeneration,
time and day override
- Master programming: configure value type, regeneration type, remote start/lock, US or European time/Volume display, system capacity safety factor, hardness, cycle
stop times, flow meter size, auxiliary delay operation
- 24 volt output AC transformer, 7, 12 day clock or
meter initiated
- Gravel under bedding for improved filtration
during regeneration
|
