- 2” NPT inlet or outlet / 2 ½” Victaulic lead free brass
epoxy coated control valve.
- Electronic flow meters for each control valve accuracy
plus or minus 5 percent, flow rate range 1.5 – 125 gpm,
gallon range 10 – 999,000 and totalizer
1,000 – 999,999,000 gallons.
- Service flow rates to 125 gpm, peak flow rates to 150 gpm,
backwash flow rates to 125 gpm.
- Fully programmable and adjustable 9 cycle control valve
that control backwash, slow/fast rinse, 2nd backwash and
service, up to 9 cycles.
- Progressive flow, parallel flow, alternating.
- System designs up to 4 vessels.
- Cycles of operation – Cycle One backwash 1 – 95 minutes
or off, Cycle Two fast rinse 1 – 180 minutes or off, Cycle
Three slow rinse 1 – 95 minutes or off, Cycle Four fast rinse
1 – 95 minutes or off, Cycle Five hold (service) 1 – 480
minutes or off, four additional cycles for additional backwash,
slow rinse, fast rinse.
- Four methods to initiate regeneration, meter immediate,
meter delayed, time clock delayed or pressure differential.
- 2” water distribution system utilizing hub and laterals for
maximum flow rates.
- Operating pressure 20 – 125 psi / 138 – 861 kpa.
- Operating temperature 40°F - 110°F (5°C - 44°C).
- Solid state microprocessor c/w removal front panel, digital
display for time of day, days until next regeneration, volume
remaining, current flow rate and total volume used (totalizer).
All 9 cycles are adjustable in second level diagnostics for desired
flow rates in each cycle.
- Double backwash for optimum regeneration cleaning ability.
- 24 volt output AC transformer, 12 or 24 hour time clock.
- 2” inlet and outlet motorized bypass valves.
- 1 – 28 day override on control valve program.
|
