- 2” NPT inlet and outlet top mounted lead free
brass epoxy coated control valve.
- Electronic flow meter with accuracy within plus
or minus 5 percent, flow rate range 1.5 to 75 gpm.
Gallons range 500 to 250,000, totalizer
1 to 9,999,000 gallons.
- Service flow rate up to 75 gpm, peak flow rate up
to 88 gpm, backwash flow rates up to 50 gpm.
- Fully adjustable 6 cycle controls backwash, slow/fast
rinse, draw, refill and service.
- Treated water on demand.
- Cycles of operation. Cycle One backwash 1-20 minutes
or off, Cycle Two draw/slow rinse 1-99 minutes or off,
Cycle Three second backwash 1-20 minutes or off,
Cycle Four fast rinse 1-20 minutes or off, Cycle Five
regeneranat refill (in service with treated water)
0.1-99 minutes of off, Cycle Six service.
- Four methods to initiate regeneration, meter immediate,
meter delayed, time clock delayed or pressure differential.
- 1 ½” water distribution system utilizing single point
distributor or hub and laterals for maximum flowrates.
- Operating pressure 20-125 psi / 138-861 kpa, operating
temperature 40°F - 110°F (5°C - 44°C).
- Solid state microprocessor c/w display for time of day,
days until next regeneration, volume remaining, current
flow rate and total volume used (totalizer).
- Double backwash for optimum regeneration cleaning
ability and salt efficiency.
- 12 volt output AC transformer.
- 1 – 28 days override on control valve programming.
- Brine tank salt grid for easy cleaning.
- Brine tanks 24” x 50” or 30” x 50” c./w brine well and safety
float to eliminate overflowing tanks. The brine tank has 800
or 1000lb water softening salt capacity.
- 1 ¼” FPT drain line, ¾” FPT brine line.
- Caustic Soda Injection System.
|
