- 2” NPT inlet and outlet top mounted lead free brass
epoxy coated control valve.
- Electronic flow meter with accuracy within plus or minus
5 percent, flow rate range 1.5 to 75 gpm. Gallons range
500 to 250,000, totalizer 1 to 9,999,000 gallons.
- Service flow rate up to 75 gpm, peak flow rate up to 88 gpm,
backwash flow rates up to 50 gpm.
- Fully adjustable 6 cycle controls backwash, slow/fast rinse
and service. 2 additional cycles for backwash or rinse
- Cycles of operation. Cycle One backwash 1-20 minutes or off,
Cycle Two slow rinse 1-99 minutes or off, Cycle Three second
backwash 1-20 minutes or off, Cycle Four fast rinse 1-20 minutes
or off, Cycle Five service.
- Four methods to initiate regeneration, meter immediate, meter
delayed, time clock delayed or pressure differential.
- 1 ½” water distribution system utilizing single point distributor
or hub and laterals for maximum flowrates.
- Operating pressure 20-125 psi / 138-861 kpa, operating temperature
40°F - 110°F (5°C - 44°C).
- Solid state microprocessor c/w display for time of day, days until
next regeneration, volume remaining, current flow rate and total
volume used (totalizer).
- Double backwash for optimum regeneration cleaning ability.
- 12 volt output AC transformer. 12 or 24 hour time clock.
- 1 – 28 days override on control valve programming.
|
