- 1” NPT inlet and outlet top mounted composite electronic control valve.
- Electronic flow meter with accuracy within plus or minus
5 percent, flow rate range 0.25 to 27 gpm. Gallons range
20 to 50,000 gallons, 1000 to 9,999,000 totalizer.
- Service flow rate up to 27 gpm, peak flow rate up to 32 gpm,
backwash flow rates up to 27 gpm.
- Fully adjustable 6 cycle controls backwash, slow/fast rinse
and service. 2 additional cycles for backwash or rinse.
- Cycles of operation. Cycle One backwash 6-12 minutes,
Cycle Two slow rinse 45-75 minutes, Cycle Three second
backwash 3-12 minutes, Cycle Four fast rinse 3-8 minutes, Cycle Five service.
- Four methods to initiate regeneration, meter immediate, meter
delayed, time clock delayed or pressure differential.
- 1” water distribution system utilizing single point distributor or hub
and laterals for maximum flowrates.
- Operating pressure 20-125 psi / 138-861 kpa, operating temperature
40°F - 110°F (5°C - 44°C).
- Solid state microprocessor c/w display for time of day, days until next regeneration,
volume remaining, current flow rate and total volume used (totalizer).
- Double backwash for optimum regeneration cleaning ability.
- 12 volt output AC transformer. 12 or 24 hour time clock.
- Duplex alternating motorized electronic control valve (1”).
- 1 – 28 days override on control valve programming.
- 1” Drain Line.
|
