- 1 ½” NPT inlet and outlet top mounted lead free
brass epoxy coated control valve.
- Electronic flow meter with accuracy within plus or minus 5 percent,
flow rate range 0.5 to 60 gpm. Gallons range 500 to 250,000,
totalizer 1 to 9,999,000 gallons.
- Service flow rate up to 60 gpm, peak flow rate up
to 68 gpm, backwash flow rates up to 50 gpm.
- Fully adjustable 6 cycle controls backwash,
slow/fast rinse, draw, refill and service.
- Soft water on demand.
- Cycles of operation. Cycle One backwash 1-20
minutes or off, Cycle Two draw/slow rinse 1-99
minutes or off, Cycle Three second backwash 1-20
minutes or off, Cycle Four fast rinse 1-20 minutes
or off, Cycle Five regeneranat refill (in service with
treated water) 0.1-99 minutes of off,
Cycle Six service.
- Four methods to initiate regeneration, meter
immediate, meter delayed, time clock delayed or
pressure differential.
- 1 ½” water distribution system utilizing single point
distributor or hub and laterals for maximum flowrates.
- Operating pressure 20-125 psi / 138-861 kpa, operating
temperature 40°F - 110°F (5°C - 44°C).
- Solid state microprocessor c/w display for time of day,
days until next regeneration, volume remaining, current
flow rate and total volume used (totalizer).
- Double backwash for optimum regeneration cleaning ability
and salt efficiency.
- 12 volt output AC transformer.
- 1 – 28 day override on control valve programming.
- Brine tank salt grid for easy cleaning.
- Brine tanks 24” x 50” or 30”x 50” c./w brine well and safety
float to eliminate overflowing tanks.
The brine tank has 800
or 1000lb water softening salt capacity.
- 1 ¼” FPT drain line, ¾” FPT brine line.
|
